Accessories

• Kwixset

  Portland cement based, Non-shrink, Non-metallic grout for use in interior or exterior glazing applications (wet or dry locations). *Important – Kwixset must not come in contact with unprotected aluminum or laminated glass.

  Click on image to enlarge   
  

  G42-10402

  Product Details

  Part #	Description
  G42-10402	Grout for use in interior or exterior glazing applications (wet or dry locations)

• Rockite

  Gypsum based, Non – Shrink, Non- Metallic grout for use in interior glazing applications (dry locations only).

  Click on image to enlarge   
  

  G42-10051

  Product Details

  Part #	Description
  G42-10051	Grout for use in interior glazing applications (dry locations only)

• Aluminum Base Drain Block

  Placed under exterior installed base shoes to provide drainage space for water runoff. Great for balconies and decks. 10 blocks per package.

  Click on image to enlarge   
  

  A42-0013-10

  Product Details

  Part #	Description	Measurement	CAD	Drawing	Cut Sheet	Length	Width	Height
  A42-0013-10	Drain Block for Base Shoes with 2-1/2" or 1-1/4" Width	2 1/4" x 2 1/2" x 1/2"				2-1/2"	2-1/4"	1/2"

• Steel Weld Block

  Welded to steel substrate to allow base shoe to be fastened using machine screws. Usable with both 0072 and 0073 Panel Grip shoe profiles.

  Click on image to enlarge   
  

  S42-0013-10

  Product Details

  Part #	Measurement	CAD	Drawing	Cut Sheet	Ø
  S42-0013-10	2 1/4" x 2 1/2" x 1/2"				1/2" - 13 Tapped Hole

• Setting Block for Base Sections

  Setting block supports and protects glass when fitted in the base section and is available for both 1/2” and 3/4” glass. Easily center glass in base shoe and support panels during expansion cement installations. We recommend two 4” pieces located at quarter points along the bottom of each panel.  Resilient EPDM provides durability and longevity, is stocked in 25’ coils, and can be cut to any size.

  Click on image to enlarge   
  

  V50-0002BKA25 V50-0006BKA25

  Product Details

  Part #	Description	CAD	Drawing	Cut Sheet
  V50-0002BKA25	Setting Block for 1/2” Glass
  V50-0006BKA25	Setting Block for 3/4” Glass

• Spacer Blocks

  Die cut, high density foam spacing and sealing pads with adhesive on one side to act as spacers. 1/4" thick x 3 7/16" tall.

  Click on image to enlarge   
  

  V50-0010N

  Product Details

  Part #	Description	CAD	Drawing	Cut Sheet
  V50-0010	For 1/2" Glass
  V50-0011	For 3/4" Glass

• Stainless Steel Adhesive

  SS High Strength Fixative.

  Click on image to enlarge   
  

  R19-1331-000-00

  Product Details

  Part #	Description
  R19-1331-000-00	Stainless Steel Adhesive, 1.69 fl oz

• Plustar High Bond Cladding Tape

  Click on image to enlarge   
  

  V50-0012

  Product Details

  Part #	Description	CAD	Drawing	Cut Sheet	Length	Width	Height
  V50-0012	Adhesive tape to attach cladding to base shoe. Use 1 - 3 rows				108 ft. Roll	.75"	.0625"

• Screws & Bolts

  Bolts and Screws for use with PanelGrip 0073, Precision Lock, & Wet Glaze base shoes.

  Click on image to enlarge   
  

  F92-0073CH

  

  F92-0073CA

  Product Details

  Part #	Description	Measurement
  F92-0073CH	For Steel - Zinc Plated Socket Head Cap Screw (10 pkg)	1/2" - 13 x 3/4"
  F92-0073CA	For Concrete - Zinc Plated Concrete Anchor Bolt (10 per pkg	1/2" x 4 1/2"