Stainless Steel Round Bump Formed Top Rails

• Stainless Steel Round Top Rails

  Formed type 304 and 316, welded channel, #8 (polished) and #4 (brushed) finishes are standard. Available for 1/2” glass at 10’ lengths.

  Click on image to enlarge   
  

  S16-0112-0400

  Product Details

  Part #	CAD	Drawing	Cut Sheet	A	B	C	D
  S16-0112				1 1/2"	5/8"	1"	.050
  S16-0200				2"	3/4"	1 1/2"	.050
  S16-0212				2 1/2"	3/4"	1 1/2"	.065
  S16-0300				3"	3/4"	1 1/2"	.065
  S16-0312				3 1/2"	3/4"	1 1/2"	.065
  S16-0400				4"	3/4"	1 1/2"	.065

• Stainless Steel Connector Sleeves

  Connector Sleeves are used to connect Top Rail and railing sections together. Custom sizes also available.

  Click on image to enlarge   
  

  S16-0112-0400CS

  Product Details

  Part #	A	Tubing Size
  S16-0112CS	1 3/8"	1 1/2" x .050" wall
  S16-0200CS	1 7/8"	2" x .050" wall
  S16-0212CS	2 3/8"	2 1/2" x .065" wall
  S16-0300CS	2 7/8"	3" x .065" wall
  S16-0312CS	3 3/8"	3 1/2" x .065" wall
  S16-0400CS	3 7/8"	4" x .065" wall

• Stainless Steel Top Rail End Caps

  End Caps fit securely into Top Rail for a finishing accent, either welded or fastened with adhesive.  Available in #8 polished or #4 brushed finish.

  Click on image to enlarge   
  

  S16-0112-0400EC

  Product Details

  Part #	A	B
  S16-0112EC	1 1/2"	.050"
  S16-0200EC	2"	.050"
  S16-0212EC	2 1/2"	.065"
  S16-0300EC	3"	.065"
  S16-0312EC	3 1/2"	.065"
  S16-0400EC	4"	.065"

• Stainless Steel Mitered Corners

  Fabricated from Morse Industries Top Rail and welded and finished to match. #8 (polished) and #4 (brushed) finishes are standard. All corners are fabricated per order. Please specify degree and location of glass pocket. Custom corners also available.

  Click on image to enlarge   
  

  S16-0112-0400C

  Product Details

  Part #	A	B	C	D
  S16-0112C	1 1/2"	5/8"	2 3/8"	3 1/2"
  S16-0200C	2"	3/4"	2 5/8"	4"
  S16-0212C	2 1/2"	3/4"	2 7/8"	4 1/2"
  S16-0300C	3"	3/4"	3 1/8"	5"
  S16-0312C	3 1/2"	3/4"	3 3/8"	5 1/2"
  S16-0400C	4"	3/4"	3 5/8"	6"

• Protective Insert for Top Rails

  Rigid vinyl protective insert is compatible with 1/2” monolithic glass. Providing a protective barrier, the insert protects glass panels when fitted inside top rail as well as aiding in alignment during installation. Stocked in 10 ft. lengths. These vinyl inserts are not compatible with 1 1/2” bump formed top rail.

  Click on image to enlarge   
  

  V50-000XBKA10

  Product Details

  Part #	Description	CAD	Drawing
  V50-0001BKA10	Top Rail Insert for 1/2” Monolithic Glass

• Top Rail to Wall Support Mount

  Morse Industries Wall Support Mount provides lateral support if Top Rail is to be attached to a wall surface. Use #10, 82 degree countersunk fasteners. The Wall Support Mount is not designed for use with the 1 1/2” SS Bump Formed Top Rail, 1.7” SS Continuous Weld Round Top Rail, or 1.9” SS Continuous Weld Round Top Rail.

  Click on image to enlarge   
  

  A42-0010AEY

  Product Details

  Part #	Description	CAD	Drawing	Cut Sheet	Width	Height
  A42-0010AEY	Wall Support Mount for Top Rails				3/4"	1-1/4"